Koleop'Terre PR-FE S2 - 10 liveries

Description

Available in 10 liveries, the second series of Formula 1/E released by Koleop'Terre has a great acceleration for his small configuration.
Compared to the first series, it has a hydrogen engine supplied by small hydrogen tanks linked to a quick charge system with a connector, a projector for quick repair sessions, and a resistant cockpit to prevent unwanted bullets, birds or parts from rough car.
As his chassis is near the ground, it is not advised to use it everywhere except flat steel tracks.

Information

PCU: 1150
Blocks: 170
Weight: 10.4t

Max speed: 359 km/h
Power supply: hydrogen engine
Rescue power supply: small battery
Refuel system: connector

Refuel/Release system

The refuel system is a single button in the toolbar. To refuel the vehicle, press once the switch when connectors attract themselves. When the fuel bar is full, press once again the button to release the car. It is not advised to use the 'P' (handbrake) key during the whole refuelling phase.

Manual building
In case you weld the car manually, follow this small guide to setup the timer blocks: https://steamcommunity.com/sharedfiles/filedetails/?id=2176317362

Note
In turns, at high speed, brake first, then turn. Don't do both in the same time.

Originally published on steam workshop: https://steamcommunity.com/sharedfiles/filedetails/?id=2172475441