Föderband Final

Conveyor V3

The time has finally come, the V3 is ready and I can say there are worlds between V1 and V3, but the way it should be! So once the data here:

Function key details

Working position

Num

8

The clutch turns 90 degrees to the left to place in front of the bunker

to create (if one controls from the tractor disconnect then only if

the clutch is finished), the bunker folded up, the one flap which

"Cockpit" to protect works, helper stands on platform in the monitor

"Cockpit" is belt-sketch shown

Position racks

Num

9

be placed behind the conveyor belt and show approximate limits for loading,

that this function is activated is shown on the conveyor belt with the Monior Sketch

Arbeitslicht2

Num

4

The lights are turned on at the Postionsstangen

Work light Num 5 Several Spotlight illuminate the conveyor belt, this is also indicated in the conveyor belt sketch

Interior light Num 6 light in the "cockpit" is turned

Flasher Num 1,2,3

Motor Num Enter The motor of the conveyor belt is started, this is also indicated in the sketch Fördband

If twins N sink the conveyor belt on difficult terrain should not, they can raise twins

Handbrake Spacebar The brake of the conveyor belt is activated / deactivated for the transport should be solved (after buying the brake is activated)

Trailer Camera M WIth images this camera, you can watch the trailer that is being loaded, the router is in the conveyor belt and the camera goes to a red light,

You can switch functions by pulling tractor or directly on the conveyor belt! For example, looking at the camera and the hand brake only switch directly on the conveyor belt.

Go to almost any function in the "cockpit" of the lights or move levers are also many functions displayed on the monitor.

This mod may not be uploaded to other Internet sites! In addition, no changes may be made without MY PERMISSION!