[ATS] Dynamic Suspension v1.0 [1.38.x]

• _{09 Nov 21:13}
  Version 2.2.5.1

  [ATS] Revamped Dynamic Suspension V2.2.5.1 [1.49]

  Patch compatibility: 1.49.x; Older versions;

  Connection order: This mod should be set at high priority / above other physics mod!

  Mod compatibility: This mod should work with all default trucks and the modded ones!

  Modded Trucks compatibility:

  – International 9800i by Harven

  – International HX520 by Harven

  – Freightliner Argosy by Harven

  – Kenworth W990 edited by Harven

  – Mack R Series by Harven

  – Kenworth T680 – The General by Harven

  – Freightliner FLB edited by Harven

  – Modified Peterbilt 379/389 by Viper2

  – On your choice! Follow the below tutorial or just request me.

  – SHORT TUTORIAL –

  1. Extract your modded truck

  2. Follow the following path:

  truck_name\def\vehicle\truck\truck.name\chassis

  3. Open all chassis 4×2 / 6×2 / 6×4 / 8×4 and modify the following lines as below:

  For 4×2

  residual_travel[]: 0.14

  residual_travel[]: 0.10

  For 6×2 / 6×4

  residual_travel[]: 0.14

  residual_travel[]: 0.10

  residual_travel[]: 0.10

  For 8×4

  residual_travel[]: 0.14

  residual_travel[]: 0.10

  residual_travel[]: 0.10

  residual_travel[]: 0.10

  4. Archieve the mod and put it into mod folder & activate it in-game

  5. Enjoy the Dynamic Suspension mod!

  Dynamic suspension settings for Keyboard / Joystick:

  c_rsteersens 0.75 # Recommended!!! Or you can set slider in-game on middle.
  g_suspension_stiffness 0.2
  g_cabin_suspension_stiffness 0
  g_truck_stability 0.25
  g_trailer_stability 0.25
  g_brake_intensity 1.0
  Dynamic suspension settings for Steering Wheel:

  g_suspension_stiffness 0
  g_cabin_suspension_stiffness 0
  g_truck_stability 0.25
  g_trailer_stability 0.25
  g_brake_intensity 1.0

  Note: If those values isn’t proper for yourself, feel free to change them.
  Note*: Write above setting in console (~) after load the profile.
  Note**: Lower value means more realistic behavior but high risk of overturn

  Credits:
  TheTiger

• _{24 Jul 03:22}
  Version 2.2.5

  [ATS] Revamped Dynamic Suspension v2.2.5 [1.48]

  This update brings some tweaks to the feeling of the truck stability. Lateral leaning simulation of the driver has been reduced and you no longer should have the feeling of the overturn in curves.

  Changelog V2.2.5:

  Physics:
  – Increased cabin sway bar factor
  – Reduced cabin COG
  – Reduced driver leaning compensation to the centrifugal acceleration
  – Reduced pitch backward

  Others:
  – Added compatibility for 1.48.x game version
  – Reworked description of the mod by accessing the Info Button in Mod Manager window
  – Added “Recommended settings” in percent values. Universal for any kind of user. (Keyboard/ Mouse/ Steering Wheel/ Joysticks and so on)

  Patch compatibility: 1.48.x; Older versions;
  Connection order: This mod should be set at high priority / above other physics mod!
  Mod compatibility: This mod should work with all default trucks and the modded ones!

  Modded Trucks compatibility:
  – International 9800i by Harven
  – International HX520 by Harven
  – Freightliner Argosy by Harven
  – Kenworth W990 edited by Harven
  – Mack R Series by Harven
  – Kenworth T680 – The General by Harven
  – Freightliner FLB edited by Harven
  – Modified Peterbilt 379/389 by Viper2
  – On your choice! Follow the below tutorial or just request me.

  SHORT TUTORIAL
  1. Extract your modded truck
  2. Follow the following path:
  truck_name\def\vehicle\truck\truck.name\chassis
  3. Open all chassis 4×2 / 6×2 / 6×4 / 8×4 and modify the following lines as below:
  For 4×2
  residual_travel[]: 0.14
  residual_travel[]: 0.10

  For 6×2 / 6×4
  residual_travel[]: 0.14
  residual_travel[]: 0.10
  residual_travel[]: 0.10

  For 8×4
  residual_travel[]: 0.14
  residual_travel[]: 0.10
  residual_travel[]: 0.10
  residual_travel[]: 0.10

  4. Archieve the mod and put it into mod folder & activate it in-game
  5. Enjoy the Dynamic Suspension mod!

  Recommended settings:
  Steering sensitivity 0.75
  Braking intensity 100%
  Truck stability 50%
  Trailer stability 50%
  Driveshaft torque 0% – 100% #Optional (use percentage as you like)
  [orange]Suspension stiffness 0%
  Cabin suspension stiffness 0%
  Uneven surface simulation 70% #Optional (use percentage as you like)
  Anti-Lock Braking System (ABS) – ON
  Traction Control – ON

  Note: If recommended settings aren’t proper for yourself, feel free to adjust them.

  https://www.paypal.com/donate/?hosted_button_id=MB39A8JBM4ZGN

  Credits
  TheTiger

• _{27 May 02:45}
  Version 2.2.4.1

  [ATS] Revamped Dynamic Suspension v2.2.4.1 [1.47]

  Dynamic Suspension V2.2.0 is a complete revamp for the current version of the game (1.43.x), based on community feedback that I’ve gathered for a long time.

  Please keep in mind that it will be available only for 1.43 and the future versions. The support for 1.42 and below versions, will be dropped. The reason is because of the changes that SCS made to the chassis in 1.43 and those will no longer work the same for 1.42 and below, especially the taglifts and midlifts.

  Also, all the modded trucks will be dropped because is a time consuming to re-download & to wait for the author to update them for the new changes. So, only default trucks at the moment will benefit from this update. Being a patreon, you have the posibility to request me a specific modded truck and I’ll add it in future. There is also a short tutorial below, teaching how to addapt a specific modded truck to Dynamic Suspension.

  So, that being said, I hope you will enjoy the new version!

  Changelog V2.2.4.1:

  – Added compatibility for Volvo VNL 2018

  —————–

  Patch compatibility: 1.47.x; Older versions;

  Connection order: This mod should be set at high priority / above other physics mod!

  Mod compatibility: This mod should work with all default trucks and the modded ones!

  Modded Trucks compatibility:

  – International 9800i by Harven

  – International HX520 by Harven

  – Freightliner Argosy by Harven

  – Kenworth W990 edited by Harven

  – Mack R Series by Harven

  – Kenworth T680 – The General by Harven

  – Freightliner FLB edited by Harven

  – Modified Peterbilt 379/389 by Viper2

  – On your choice! Follow the below tutorial or just request me.

  – SHORT TUTORIAL –

  1. Extract your modded truck

  2. Follow the following path:

  truck_name\def\vehicle\truck\truck.name\chassis

  3. Open all chassis 4×2 / 6×2 / 6×4 / 8×4 and modify the following lines as below:

  For 4×2

  residual_travel[]: 0.14

  residual_travel[]: 0.10

  For 6×2 / 6×4

  residual_travel[]: 0.14

  residual_travel[]: 0.10

  residual_travel[]: 0.10

  For 8×4

  residual_travel[]: 0.14

  residual_travel[]: 0.10

  residual_travel[]: 0.10

  residual_travel[]: 0.10

  4. Archieve the mod and put it into mod folder & activate it in-game

  5. Enjoy the Dynamic Suspension mod!

  Dynamic suspension settings for Keyboard / Joystick:

  c_rsteersens 0.75 # Recommended!!! Or you can set slider in-game on middle.
  g_suspension_stiffness 0.2
  g_cabin_suspension_stiffness 0
  g_truck_stability 0.25
  g_trailer_stability 0.25
  g_brake_intensity 1.0
  Dynamic suspension settings for Steering Wheel:

  g_suspension_stiffness 0
  g_cabin_suspension_stiffness 0
  g_truck_stability 0.25
  g_trailer_stability 0.25
  g_brake_intensity 1.0

  Note: If those values isn’t proper for yourself, feel free to change them.
  Note*: Write above setting in console (~) after load the profile.
  Note**: Lower value means more realistic behavior but high risk of overturn

  https://www.paypal.com/donate/?hosted_button_id=MB39A8JBM4ZGN

  Credits:
  TheTiger

• _{13 Apr 02:59}
  Version 2.2.4

  [ATS] Revamped Dynamic Suspension v2.2.4 [1.47]

  This modification makes truck behavior to feel more realistic with Steering Wheel or Keyboard. This mode have “Realistic Steering with Keyboard” included. It allows you to make smooth turns on high speed without overturn the truck even if you use realistic suspension settings, in this case “Dynamic Suspension”.

  The steering become harder when switching direction and increasing speed. It is less harder when is stationary, ideal for parking!

  Aswell, braking is a important factor in simulation and also I made some improvements, helping keyboard users also. Now braking is progressive and not so brutal as the default. You will have to use more often the retarder or engine brake.

  Patch compatibility: 1.47.x; Older versions;
  Connection order: This mod should be set at high priority / above other physics mod!
  Mod compatibility: This mod should work with all default trucks and the modded ones!
  Modded Trucks compatibility: Read the README FILE!

  Dynamic suspension settings for Keyboard:
  c_rsteersens 0.75 # Recommended!!! Or you can set slider in-game on middle.
  g_suspension_stiffness 0.2
  g_cabin_suspension_stiffness 0
  g_truck_stability 0.25
  g_trailer_stability 0.25
  g_brake_intensity 1.0

  > Dynamic suspension settings for Steering Wheel:

  g_suspension_stiffness 0
  g_cabin_suspension_stiffness 0
  g_truck_stability 0.25
  g_trailer_stability 0.25
  g_brake_intensity 1.0

  Note: If those values isn’t proper for yourself, feel free to change them.
  Note*: Write above setting in console (~) after load the profile.
  Note**: Lower value means more realistic behavior but high risk of overturn

  Changelog 2.2.4:
  Added support for 1.47.x game version

  Fixed chassis errors with Kenworth W900

  Credits
  TheTiger

• _{26 Apr 06:46}
  Version 2.2.1

  [ATS] Revamped Dynamic Suspension v2.2.1 [1.43/1.44]

  Revamped Version

  Dynamic Suspension V2.2.0 is a complete revamp for the current version of the game (1.43.x), based on community feedback that I’ve gathered for a long time.

  Please keep in mind that it will be available only for 1.43 and the future versions. The support for 1.42 and below versions, will be dropped. The reason is because of the changes that SCS made to the chassis in 1.43 and those will no longer work the same for 1.42 and below, especially the taglifts and midlifts.

  Also, all the modded trucks will be dropped because is a time consuming to re-download & to wait for the author to update them for the new changes. So, only default trucks at the moment will benefit from this update. Being a patreon, you have the posibility to request me a specific modded truck and I’ll add it in future. There is also a short tutorial below, teaching how to addapt a specific modded truck to Dynamic Suspension.

  So, that being said, I hope you will enjoy the new version!

  Changelog V2.2.1:

  – Added compatibility for 1.44 game version

  Changelog V2.2.0:

  – Decreased pitch driver pitch forward

  – Decreased air resistance (resulting in real values for avg. fuel consumption)

  – Increased cabin pitch angle

  – Increased suspension travel

  – Increased cabin damping factor

  – Increased wheel damping factor

  – Increased anti-roll/sway-bar stiffness

  – Increased roughness of the tyre material(decrease of slippery on wet conditions in curves)

  – Increased damping of tyre deformation for lateral factor (decrease of slippery on wet conditions in curves)

  – Reworked all truck chassis

  —————–

  Patch compatibility: 1.44.x; 1.43.x;

  Connection order: This mod should be set at high priority / above other physics mod!

  Mod compatibility: This mod should work with all default trucks and the modded ones!

  Modded Trucks compatibility:

  – International 9800i by Harven

  – International HX520 by Harven

  – Freightliner Argosy by Harven

  – Kenworth W990 edited by Harven

  – Mack R Series by Harven

  – Kenworth T680 – The General by Harven

  – Freightliner FLB edited by Harven

  – Modified Peterbilt 379/389 by Viper2

  – On your choice! Follow the below tutorial or just request me.

  – SHORT TUTORIAL –

  1. Extract your modded truck

  2. Follow the following path:

  truck_name\def\vehicle\truck\truck.name\chassis

  3. Open all chassis 4×2 / 6×2 / 6×4 / 8×4 and modify the following lines as below:

  For 4×2

  residual_travel[]: 0.14

  residual_travel[]: 0.10

  For 6×2 / 6×4

  residual_travel[]: 0.14

  residual_travel[]: 0.10

  residual_travel[]: 0.10

  For 8×4

  residual_travel[]: 0.14

  residual_travel[]: 0.10

  residual_travel[]: 0.10

  residual_travel[]: 0.10

  4. Archieve the mod and put it into mod folder & activate it in-game

  5. Enjoy the Dynamic Suspension mod!

  Dynamic suspension settings for Keyboard / Joystick:

  c_rsteersens 0.75 # Recommended!!! Or you can set slider in-game on middle.
  g_suspension_stiffness 0.2
  g_cabin_suspension_stiffness 0
  g_truck_stability 0.25
  g_trailer_stability 0.25
  g_brake_intensity 1.0
  Dynamic suspension settings for Steering Wheel:

  g_suspension_stiffness 0
  g_cabin_suspension_stiffness 0
  g_truck_stability 0.25
  g_trailer_stability 0.25
  g_brake_intensity 1.0

  Note: If those values isn’t proper for yourself, feel free to change them.
  Note*: Write above setting in console (~) after load the profile.
  Note**: Lower value means more realistic behavior but high risk of overturn

  Credits:
  TheTiger

• _{25 Nov 01:50}
  Version 2.1.4

  Dynamic Suspension Mod v2.1.4 (1.43.x)

  Dynamic Suspension - This modification makes truck behavior to feel more realistic with Steering Wheel or Keyboard. This mode have “Realistic Steering with Keyboard” included. It allows you to make smooth turns on high speed without overturn the truck even if you use realistic suspension settings, in this case “Dynamic Suspension”. The steering become harder when switching direction and increasing speed. It is less harder when is stationary, ideal for parking!

  Changes in v2.1.4:
  – Added support for 1.43.x game version
  - Added support for Peterbilt 379 by Dom's (free version)

  Added support for modded trucks:
  – Freightliner Argosy by Odd_fellow
  – Freightliner FLB by Harven
  – Mack R Series by Harven
  – Kenworth K100-E by Overfloater
  – Freightliner FLC by XBS
  – Peterbilt Pinga
  – Kenworth W900 by Pinga
  – Peterbilt 389 Glider by Jon Ruda
  – Freightliner Classic XL by Jon Ruda
  – Kenworth W900 Highway Killer by Jon Ruda
  – Peterbilt 389 by Viper2
  – Peterbilt 387 by Truck Sim Club
  – Kenworth W990 by Harven

  Settings
  > Dynamic suspension settings for Keyboard:
  c_rsteersens 0.75 # Recommended!!! Or you can set slider in-game on middle.
  g_suspension_stiffness 0.2
  g_cabin_suspension_stiffness 0
  g_truck_stability 0.25
  g_trailer_stability 0.25
  g_brake_intensity 1.0

  > Dynamic suspension settings for Steering Wheel:
  g_suspension_stiffness 0
  g_cabin_suspension_stiffness 0
  g_truck_stability 0.25
  g_trailer_stability 0.25
  g_brake_intensity 1.0

• _{03 Nov 01:31}
  Version 2.1.3.1

  [ATS] Dynamic Suspension V2.1.3.1 [1.42.x]

  Dynamic Suspension V2.1.3.1 [1.42.x; Older versions] ATS

  This modification makes truck behavior to feel more realistic with Steering Wheel or Keyboard. This mode have “Realistic Steering with Keyboard” included. It allows you to make smooth turns on high speed without overturn the truck even if you use realistic suspension settings, in this case “Dynamic Suspension”.

  The steering become harder when switching direction and increasing speed. It is less harder when is stationary, ideal for parking!

  Aswell, braking is a important factor in simulation and also I made some improvements, helping keyboard users also. Now braking is progressive and not so brutal as the default. You will have to use more often the retarder or engine brake.

  Patch compatibility: 1.42.x; Older versions;

  Connection order: This mod should be set at high priority / above other physics mod!

  Mod compatibility: This mod should work with all default trucks and the modded ones!

  Modded Trucks compatibility:

  – Freightliner Argosy by Odd_fellow
  – Freightliner FLB by Harven
  – Mack R Series by Harven
  – Kenworth K100-E by Overfloater
  – Freightliner FLC by XBS
  – Peterbilt Pinga
  – Kenworth W900 by Pinga
  – Peterbilt 389 Glider by Jon Ruda
  – Freightliner Classic XL by Jon Ruda
  – Kenworth W900 Highway Killer by Jon Ruda
  – Peterbilt 389 by Viper2
  – Peterbilt 387 by Truck Sim Club
  – Kenworth W990 by Harven

  Dynamic suspension settings for Keyboard:

  c_rsteersens 0.75 # Recommended!!! Or you can set slider in-game on middle.
  g_suspension_stiffness 0.2
  g_cabin_suspension_stiffness 0
  g_truck_stability 0.25
  g_trailer_stability 0.25
  g_brake_intensity 1.0

  Dynamic suspension settings for Steering Wheel:

  g_suspension_stiffness 0
  g_cabin_suspension_stiffness 0
  g_truck_stability 0.25
  g_trailer_stability 0.25
  g_brake_intensity 1.0

  Note: If those values isn’t proper for yourself, feel free to change them.
  Note*: Write above setting in console (~) after load the profile.
  Note**: Lower value means more realistic behavior but high risk of overturn

  Changelog 2.1.3.1:
  Added support for 1.42.x game version

• _{10 Sep 03:12}
  Version 2.1.3

  [ATS] Dynamic Suspension V2.1.3 [1.41.x]

  This modification makes truck behavior to feel more realistic with Steering Wheel or Keyboard. This mode have “Realistic Steering with Keyboard” included. It allows you to make smooth turns on high speed without overturn the truck even if you use realistic suspension settings, in this case “Dynamic Suspension”.

  The steering become harder when switching direction and increasing speed. It is less harder when is stationary, ideal for parking!

  Aswell, braking is a important factor in simulation and also I made some improvements, helping keyboard users also. Now braking is progressive and not so brutal as the default. You will have to use more often the retarder or engine brake.

  —————————————————————————————————————–

  Patch compatibility: 1.41.x; 1.40.x;

  Connection order: This mod should be set at high priority / above other physics mod!

  Mod compatibility: This mod should work with all default trucks and the modded ones!

  Modded Trucks compatibility:

  – Freightliner Argosy by Odd_fellow
  – Freightliner FLB by Harven
  – Mack R Series by Harven
  – Kenworth K100-E by Overfloater
  – Freightliner FLC by XBS
  – Peterbilt Pinga
  – Kenworth W900 by Pinga
  – Peterbilt 389 Glider by Jon Ruda
  – Freightliner Classic XL by Jon Ruda
  – Kenworth W900 Highway Killer by Jon Ruda
  – Peterbilt 389 by Viper2
  – Peterbilt 387 by Truck Sim Club
  – Kenworth W990 by Harven

  > Dynamic suspension settings for Keyboard:

  c_rsteersens 0.75 # Recommended!!! Or you can set slider in-game on middle.
  g_suspension_stiffness 0.2
  g_cabin_suspension_stiffness 0
  g_truck_stability 0.25
  g_trailer_stability 0.25
  g_brake_intensity 1.0

  > Dynamic suspension settings for Steering Wheel:

  g_suspension_stiffness 0
  g_cabin_suspension_stiffness 0
  g_truck_stability 0.25
  g_trailer_stability 0.25
  g_brake_intensity 1.0

  Note: If those values isn’t proper for yourself, feel free to change them.
  Note*: Write above setting in console (~) after load the profile.
  Note**: Lower value means more realistic behavior but high risk of overturn

  —————————————————————————————————————–

  Changelog 2.1.3:
  – Added support for International LT

  —————————————————————————————————————–

  If you enjoy my mod and want to share your appreciation, you can buy me a coffee. (???????)?
  https://www.paypal.me/th3tiger
  https://www.patreon.com/tigermods

  Credits:
  TheTiger, SCS Software

• _{18 Jul 19:48}
  Version 2.1.2

  [ATS] Dynamic Suspension V2.1.2 [1.41.x]

  This modification makes truck behavior to feel more realistic with Steering Wheel or Keyboard. This mode have “Realistic Steering with Keyboard” included. It allows you to make smooth turns on high speed without overturn the truck even if you use realistic suspension settings, in this case “Dynamic Suspension”.

  The steering become harder when switching direction and increasing speed. It is less harder when is stationary, ideal for parking!

  Aswell, braking is a important factor in simulation and also I made some improvements, helping keyboard users also. Now braking is progressive and not so brutal as the default. You will have to use more often the retarder or engine brake.

  —————————————————————————————————————–

  Patch compatibility: 1.41.x; 1.40.x;

  Connection order: This mod should be set at high priority / above other physics mod!

  Mod compatibility: This mod should work with all default trucks and the modded ones!

  Modded Trucks compatibility:

  – Freightliner Argosy by Odd_fellow
  – Freightliner FLB by Harven
  – Mack R Series by Harven
  – Kenworth K100-E by Overfloater
  – Freightliner FLC by XBS
  – Peterbilt Pinga
  – Kenworth W900 by Pinga
  – Peterbilt 389 Glider by Jon Ruda
  – Freightliner Classic XL by Jon Ruda
  – Kenworth W900 Highway Killer by Jon Ruda
  – Peterbilt 389 by Viper2
  – Peterbilt 387 by Truck Sim Club
  – Kenworth W990 by Harven

  > Dynamic suspension settings for Keyboard:

  c_rsteersens 0.75 # Recommended!!! Or you can set slider in-game on middle.
  g_suspension_stiffness 0.2
  g_cabin_suspension_stiffness 0
  g_truck_stability 0.25
  g_trailer_stability 0.25
  g_brake_intensity 1.0

  > Dynamic suspension settings for Steering Wheel:

  g_suspension_stiffness 0
  g_cabin_suspension_stiffness 0
  g_truck_stability 0.25
  g_trailer_stability 0.25
  g_brake_intensity 1.0

  Note: If those values isn’t proper for yourself, feel free to change them.
  Note*: Write above setting in console (~) after load the profile.
  Note**: Lower value means more realistic behavior but high risk of overturn

  —————————————————————————————————————–

  Changelog 2.1.2:
  – Added compatiblity with 1.41.x
  – Added support for Kenworth W990 by Harven

  —————————————————————————————————————–

  If you enjoy my mod and want to share your appreciation, you can buy me a coffee. (???????)?
  https://www.paypal.me/th3tiger
  https://www.patreon.com/tigermods

  Credits:
  TheTiger

• _{23 Jun 00:17}
  Version 2.1.1

  Dynamic Suspension v2.1.1 [1.40 - 1.41]

  This modification makes truck behavior to feel more realistic with Steering Wheel or Keyboard. This mode have “Realistic Steering with Keyboard” included. It allows you to make smooth turns on high speed without overturn the truck even if you use realistic suspension settings, in this case “Dynamic Suspension”.

  The steering become harder when switching direction and increasing speed. It is less harder when is stationary, ideal for parking!

  Aswell, braking is a important factor in simulation and also I made some improvements, helping keyboard users also. Now braking is progressive and not so brutal as the default. You will have to use more often the retarder or engine brake.

  —————————————————————————————————————–

  Patch compatibility: 1.41.x; 1.40.x;

  Connection order: This mod should be set at high priority / above other physics mod!

  Mod compatibility: This mod should work with all default trucks and the modded ones!

  Modded Trucks compatibility:

  – Freightliner Argosy by Odd_fellow
  – Freightliner FLB by Harven
  – Mack R Series by Harven
  – Kenworth K100-E by Overfloater
  – Freightliner FLC by XBS
  – Peterbilt Pinga
  – Kenworth W900 by Pinga
  – Peterbilt 389 Glider by Jon Ruda
  – Freightliner Classic XL by Jon Ruda
  – Kenworth W900 Highway Killer by Jon Ruda
  – Peterbilt 389 by Viper2
  – Peterbilt 387 by Truck Sim Club

  > Dynamic suspension settings for Keyboard:

  c_rsteersens 0.75 # Recommended!!! Or you can set slider in-game on middle.
  g_suspension_stiffness 0.2
  g_cabin_suspension_stiffness 0
  g_truck_stability 0.25
  g_trailer_stability 0.25
  g_brake_intensity 1.0

  > Dynamic suspension settings for Steering Wheel:

  g_suspension_stiffness 0
  g_cabin_suspension_stiffness 0
  g_truck_stability 0.25
  g_trailer_stability 0.25
  g_brake_intensity 1.0

  Note: If those values isn’t proper for yourself, feel free to change them.
  Note*: Write above setting in console (~) after load the profile.
  Note**: Lower value means more realistic behavior but high risk of overturn

  —————————————————————————————————————–

  Long time since a new update, huh? It’s time for some improvements. Here it is a changelog:

  Changelog 2.1.1:
  – Added compatiblity with 1.41.x

  Changelog 2.1.0:

  Truck behavior:
  – Reduced brake strength at lower speed

  – Increased front brakes strength

  – Softened cabin suspension damping

  – Increased anti-roll/sway-bar stiffness

  – Increased coefficients related to wheel slipping (better grip when raining)

  Driver behavior:
  – Reduced driver leaning

  – Reduced driver pitch forward

  – Reduced driver-seat restitution coeficient

  – Increased driver height stiffness

  Add-ons:
  – Fixed error/possible crash with Peterbilt 389 Viper2

  That’s all for now. :D If something isn’t working properly, let me know. I hope you enjoy it!

  —————————————————————————————————————–

  If you enjoy my mod and want to share your appreciation, you can buy me a coffee. (???????)?
  https://www.paypal.me/th3tiger
  https://www.patreon.com/tigermods

• _{27 Apr 03:05}
  Version 2.1.0

  Dynamic Suspension v2.1.0 [1.40]

  This modification makes truck behavior to feel more realistic with Steering Wheel or Keyboard. This mode have “Realistic Steering with Keyboard” included. It allows you to make smooth turns on high speed without overturn the truck even if you use realistic suspension settings, in this case “Dynamic Suspension”.
  The steering become harder when switching direction and increasing speed. It is less harder when is stationary, ideal for parking!
  Aswell, braking is a important factor in simulation and also I made some improvements, helping keyboard users also. Now braking is progressive and not so brutal as the default. You will have to use more often the retarder or engine brake.

  Patch compatibility: 1.40.x;Connection order: This mod should be set at high priority / above other physics mod!Mod compatibility: This mod should work with all default trucks and the modded ones!Modded Trucks compatibility:- Freightliner Argosy by Odd_fellow- Freightliner FLB by Harven- Mack R Series by Harven- Kenworth K100-E by Overfloater- Freightliner FLC by XBS- Peterbilt Pinga- Kenworth W900 by Pinga- Peterbilt 389 Glider by Jon Ruda- Freightliner Classic XL by Jon Ruda- Kenworth W900 Highway Killer by Jon Ruda- Peterbilt 389 by Viper2- Peterbilt 387 by Truck Sim ClubDynamic suspension settings for Keyboard:c_rsteersens 0.75 # Recommended!!! Or you can set slider in-game on middle.g_suspension_stiffness 0.2g_cabin_suspension_stiffness 0g_truck_stability 0.25g_trailer_stability 0.25g_brake_intensity 1.0Dynamic suspension settings for Steering Wheel:g_suspension_stiffness 0g_cabin_suspension_stiffness 0g_truck_stability 0.25g_trailer_stability 0.25g_brake_intensity 1.0
  Note: If those values isn’t proper for yourself, feel free to change them. Note*: Write above setting in console (~) after load the profile. Note**: Lower value means more realistic behavior but high risk of overturn

  Long time since a new update, huh? It’s time for some improvements. Here it is a changelog:

  Changelog 2.1.0:
  Truck behavior:
  – Reduced brake strength at lower speed
  – Increased front brakes strength
  – Softened cabin suspension damping
  – Increased anti-roll/sway-bar stiffness
  – Increased coefficients related to wheel slipping (better grip when raining)

  Driver behavior:
  – Reduced driver leaning
  – Reduced driver pitch forward
  – Reduced driver-seat restitution coeficient
  – Increased driver height stiffness

  Add-ons:
  – Fixed error/possible crash with Peterbilt 389 Viper2
  That’s all for now.

• _{10 Feb 23:26}
  Version 2.0.2

  [ATS] DYNAMIC SUSPENSION V2.0.2 1.40.X

  Changelog 2.0.2:
  - Added compatibility for 1.40.x game version

  This modification makes truck behavior to feel more realistic with Steering Wheel or Keyboard. This mode have “Realistic Steering with Keyboard” included. It allows you to make smooth turns on high speed without overturn the truck even if you use realistic suspension settings, in this case “Dynamic Suspension”.
  The steering become harder when switching direction and increasing speed. It is less harder when is stationary, ideal for parking!
  Braking is a important factor in simulation and also I made some improvements, helping keyboard users also. Now braking is progressive and not so brutal as the default. You will have to use more often the retarder or engine brake.
  The video below is a demonstration for those who don’t have a steering wheel and want some realism with keyboard. I hope you enjoy it.

• _{04 Dec 22:11}
  Version 2.0.0

  [ATS] Dynamic Suspension V2.0.0 [1.39.x]

  This modification makes truck behavior to feel more realistic with Steering Wheel or Keyboard. This mode have “Realistic Steering with Keyboard” included.
  It allows you to make smooth turns on high speed without overturn the truck even if you use realistic suspension settings, in this case “Dynamic Suspension”.

  The steering become harder when switching direction and increasing speed. It is less harder when is stationary, ideal for parking!

  Braking is a important factor in simulation and also I made some improvements, helping keyboard users also. Now braking is progressive and not so brutal as the default. You will have to use more often the retarder or engine brake.

  The video below is a demonstration for those who don’t have a steering wheel and want some realism with keyboard. I hope you enjoy it.

  Changelog 2.0.0:

  ENGINE compression factor:
  – Increased Intensity of engine braking.

  TRANSMISSION CHARACTERISTICS:
  -Increased Retarder resistance factor.
  – Decreased Flywheel resistance factor. (RPM loss)
  – Adjusted when using clutch manual / automatic gearbox is taking off / changing gear.
  – Increased torque converter-based transmissions.
  – Increased relative magnitude of flywheel inertia
  – Decreased transmissions inertia relative to the flywheel

  Added support for modded trucks:
  – Freightliner Argosy by Odd_fellow
  – Freightliner FLB by Harven
  – Mack R Series by Harven
  – Kenworth K100-E by Overfloater
  – Freightliner FLC by XBS

  Note: This file containts default game controls so feel free to adjust them as you wish.

  Patch compatibility: 1.39.x ; Older versions

  Connection order: This mod should be set at high priority / above other physics mod!

  Mod compatibility: This mod should work with all default trucks and the moded ones!

  Settings for Keyboard Users:

  c_rsteersens 0.75 # Recommended!!! Or you can set slider in-game on middle.

  Dynamic suspension settings:

  g_suspension_stiffness 0.2
  g_cabin_suspension_stiffness 0
  g_truck_stability 0.5
  g_trailer_stability 0.5
  g_brake_intensity 1.0 # Decrease value if is too strong.

  Settings for Steering Wheel Users:

  Dynamic suspension settings:

  g_suspension_stiffness 0
  g_cabin_suspension_stiffness 0
  g_truck_stability 0.25
  g_trailer_stability 0.25
  g_brake_intensity 1.0 # Decrease value if is too strong.

  Note: If those values isn’t proper for yourself, feel free to change them.
  Note*: Write above setting in console (~) after load the profile.
  Note**: Lower value means more realistic behavior but high risk of overturn

  Very important! This mod doesn’t work on TruckersMP!

  If you enjoy my mod and want to share your appreciation, you can buy me a coffee. (???????)?

  https://www.paypal.me/th3tiger

• _{11 Oct 22:45}
  Version 1.0.2

  [ATS] Dynamic Suspension V1.0.2 [1.39]

  This modification makes truck behavior to feel more realistic with Steering Wheel or Keyboard. This mode have “Realistic Steering with Keyboard” included.
  It allows you to make smooth turns on high speed without overturn the truck even if you use realistic suspension settings, in this case “Dynamic Suspension”.

  The steering become harder when switching direction and increasing speed. It is less harder when is stationary, ideal for parking!

  Braking is a important factor in simulation and also I made some improvements, helping keyboard users also. Now braking is progressive and not so brutal as the default. You will have to use more often the retarder or engine brake.

  The video below is a demonstration for those who don’t have a steering wheel and want some realism with keyboard. I hope you enjoy it.

  Changelog 1.0.2:

  Fixed problem with missing sounds for:
  – air_brake
  – air_cutoff
  – reverse
  – lift axle
  – hook_attach
  – hook_detach
  – trailer_cables

  Note: This file containts default game controls so feel free to adjust them as you wish.

  Patch compatibility: 1.39.x ; Older versions

  Connection order: This mod should be set at high priority / above other physics mod!

  Mod compatibility: This mod should work with all default trucks and the moded ones!

  Modded Trucks Compatibility:

  – NONE
  – Only on request on original forum: https://forum.scssoft.com/viewtopic.php?f=273&t=290066

  Add-ons:

  – NONE
  – Only on request on original forum: https://forum.scssoft.com/viewtopic.php?f=273&t=290066

  Settings for Keyboard Users:

  c_rsteersens 0.75 # Recommended!!! Or you can set slider in-game on middle.

  Dynamic suspension settings:

  g_suspension_stiffness 0.2
  g_cabin_suspension_stiffness 0
  g_truck_stability 0.5
  g_trailer_stability 0.5
  g_brake_intensity 1.0 # Decrease value if is too strong.

  Settings for Steering Wheel Users:

  Dynamic suspension settings:

  g_suspension_stiffness 0
  g_cabin_suspension_stiffness 0
  g_truck_stability 0.25
  g_trailer_stability 0.25
  g_brake_intensity 1.0 # Decrease value if is too strong.

  Note: If those values isn’t proper for yourself, feel free to change them.
  Note*: Write above setting in console (~) after load the profile.
  Note**: Lower value means more realistic behavior but high risk of overturn

  Very important! This mod doesn’t work on TruckersMP!

  If you enjoy my mod and want to share your appreciation, you can buy me a coffee. (???????)?
  https://www.paypal.me/th3tiger

• _{11 Oct 00:47}
  Version 1.0.1

  [ATS] Dynamic Suspension V1.0.1 [1.38 - 1.39]

  Changelog 1.0.1:
  - Support for 1.39.x game version

  This modification makes truck behavior to feel more realistic with Steering Wheel or Keyboard. This mode have “Realistic Steering with Keyboard” included. It allows you to make smooth turns on high speed without overturn the truck even if you use realistic suspension settings, in this case “Dynamic Suspension”.
  The steering become harder when switching direction and increasing speed. It is less harder when is stationary, ideal for parking!
  Braking is a important factor in simulation and also I made some improvements, helping keyboard users also. Now braking is progressive and not so brutal as the default. You will have to use more often the retarder or engine brake.
  The video below is a demonstration for those who don’t have a steering wheel and want some realism with keyboard. I hope you enjoy it.

  Note: This file containts default game controls so feel free to adjust them as you wish. ????

  Patch compatibility: 1.39.x ; Older versions

  Connection order: This mod should be set at high priority / above other physics mod!

  Mod compatibility: This mod should work with all default trucks and the moded ones!

  Modded Trucks Compatibility:

  – NONE
  – Only on request on original forum: https://forum.scssoft.com/viewtopic.php?f=273&t=290066

  Add-ons:

  – NONE
  – Only on request on original forum: https://forum.scssoft.com/viewtopic.php?f=273&t=290066

  Settings for Keyboard Users:

  c_rsteersens 0.75 # Recommended!!! Or you can set slider in-game on middle.

  Dynamic suspension settings:

  g_suspension_stiffness 0.2
  g_cabin_suspension_stiffness 0
  g_truck_stability 0.5
  g_trailer_stability 0.5
  g_brake_intensity 1.0 # Decrease value if is too strong.

  Settings for Steering Wheel Users:

  Dynamic suspension settings:

  g_suspension_stiffness 0
  g_cabin_suspension_stiffness 0
  g_truck_stability 0.25
  g_trailer_stability 0.25
  g_brake_intensity 1.0 # Decrease value if is too strong.

  Note: If those values isn’t proper for yourself, feel free to change them.
  Note*: Write above setting in console (~) after load the profile.
  Note**: Lower value means more realistic behavior but high risk of overturn

  Very important! This mod doesn’t work on TruckersMP!

  If you enjoy my mod and want to share your appreciation, you can buy me a coffee. (???????)?
  https://www.paypal.me/th3tiger

• _{08 Oct 02:15}
  Version 1.0

Files